Particleboard

SierraPine produces particleboard at three plants located across the United States in a variety of species, each with their own unique characteristics - Douglas fir and western pine on the west coast and southern pine on the east coast.

Particleboard is a non-structural interior product made from wood particles that are byproducts from the manufacture of other wood products. The wood particles are mixed with resins or binders and formed under heat and pressure into a panel. The board consists of several layers: A core and two outside layers or faces. All of SierraPine’s particleboard products are SCS certified for their recycled fiber content. A summary of the products manufactured at each of our plants is shown below. Look further for downloadable PDF's of our specification sheets, CARB certificates and MSDS.

Industrial

Manufacturer Locations

Adel, GA
Designed to meet the demands of today's critical applications. SierraPine's particleboard manufactured in Adel, GA provides consistent quality and performance, especially in laminating applications using thin, glossy papers. From Adel, GA SierraPine ships products over the road or via rail which gives you options for cost effective logistics.

Southern Pine
PBS Commercial, PB2, PB3 Industrial, Countertop, Shelving
High Density; 50-53-55 lb
Press Size: 5' x 18'
Panel Sizes: 5' x 6' to 5' x 18'
Thicknesses ranging from 7/16" - 1 1/2"
ECC Certificate | Spec Sheet

Martell, CA
Made from Western softwood, SierraPine particleboard manufactured in Martell, CA, better known by its brand name, Ampine®, is known for its high quality and ease of workmanship. Ampine® has long been recognized for its highly machinable core and smooth, uniform surface which accepts a variety of decorative laminates and finishes.

Western Pine
PBS Commercial, PB2, PB3 Industrial, Countertop, Shelving (up to 16' lengths), Underlayment
High Density; 50-53-55 lb.
Cut-to-size Capabilities
Press size: 5' x 24'
Panel Sizes: 4'x 6' to 5' x 16'
Thicknesses ranging from 3/8" – 1 1/4"
ECC Certificate | Spec Sheet

Springfield, OR
Manufactured primarily from Douglas Fir, SierraPine's Springfield particleboard offers and impressive line of panel products with dimensional stability, higher bending properties and enhanced core stength. From Springfield, OR SierraPine ships products over the road or via rail which gives you options for cost-effective logistics.

Douglas Fir
PBS Commercial, PB2 and PB3 Elite Industrial, Countertop, Shelving, Underlayment
High Density; 50-53-55 lb
Cut-to-Size Capabilities
Press size: 4' x 16 ‘ & 5' x 24'
Panel sizes: 4' x 6' to 5' x 14'
Thicknesses ranging from 3/8" – 1 3/4"
ECC Certificate | Spec Sheet

 

Files

Current SCS Certificates can be requested by contacting SierraPine.

 

Ampine
Made from Western softwood, SierraPine particleboard manufactured in Martell, CA, better known by its brand name, Ampine®, is known for its high quality and ease of workmanship. Ampine® has long been recognized for its highly machinable core and smooth, uniform surface which accepts a variety of decorative laminates and finishes.
 

Files

Current SCS Certificates can be requested by contacting SierraPine.

 

Encore

Encore™ Sustainable Design Particleboard (SDP) was the first introduction in SierraPine's full line of sustainable particleboard products. Manufactured with a formaldehyde free adhesive system, Encore has the highest physical properties in a sustainable particleboard product available today. This product is ideal for cabinetry, furniture components, casework, countertop, shelving, retail fixtures, office furniture and stair tread.

  • No-added formaldehyde
  • Highest physical properties
  • Pre-consumer and post-consumer recycled wood content
  • FSC® Mix Credit Certified - available option
  • LEED® credit support: MRc4, 5, 7 & IEQc4.4
  • CARB ATCM 93120 Phase 2 Certified
  • Third party certification - SCS, ECC
  • CHPS compliant - California section 01350 approved
  • Developed and manufactured with pride in Springfield, OR, Martell, CA and Adel, GA

Encore™ and Encore™ MR, sustainable design particleboard panels utilize an adhesive system containing no added formaldehyde and are manufactured with recycled wood content. Encore meets the most stringent emission standards in the world and offers the highest physical properties in a no added formaldehyde particleboard available on the market today. This product is ECC & SCS Certified and CHPS Compliant.

Manufacturer Locations

Adel, GA
Southern Pine
PB2 Industrial
Press Size: 5' x 18'
Panel Sizes: 5' x 6' to 5' x 18'
Thicknesses ranging from 7/16" - 1 1/2"
ECC Certificate | Spec Sheet

Martell, CA
Western Pine
PB2 Industrial
Cut-to-size Capabilities
Press size: 5' x 24'
Panel Sizes: 4'x 6' to 5' x 16'
Thicknesses ranging from 3/8" – 1 1/4"
ECC Certificate | Spec Sheet

Springfield, OR
Douglas Fir
PB2, PB3 Industrial
Cut-to-Size Capabilities
Press size: 4' x 16 ‘ & 5' x 24'
Panel sizes: 4' x 6' to 5' x 14'
Thicknesses ranging from 3/8" – 1 3/4"
ECC Certificate | Spec Sheet

Files

Current SCS Certificates can be requested by contacting SierraPine.

Encore MR
 

Encore™ MR Sustainable Design Particleboard (SDP) is yet another product introduction in SierraPine's line of sustainable particleboard products. Manufactured with a formaldehyde free adhesive system, Encore MR is a moisture resistant product demonstrating enhanced dimensional stability in high humidity environments. It is ideal for countertop, cabinetry, casework, shelving and stair tread and is also available with higher density for applications such as mezzanine decking.

  • No-added formaldehyde
  • Moisture resistant
  • Pre-consumer and post-consumer recycled wood content
  • FSC® mix credit certified - available option
  • LEED® credit support: MRc4, 5, 7 & IEQc4.4
  • CARB ATCM 93120 Phase 2 Certified
  • Third party certification - SCS, ECC
  • CHPS compliant - California section 01350 approved
  • Developed and manufactured with pride in Springfield, OR; Martell, CA; and Adel, GA.

Encore™ and Encore™ MR, sustainable design particleboard panels utilize an adhesive system containing no added formaldehyde and are manufactured with recycled wood content. Encore meets the most stringent emission standards in the world and offers the highest physical properties in a no added formaldehyde particleboard available on the market today. This product is ECC & SCS Certified and CHPS Compliant.

Manufacturer Locations

Adel, GA
Southern Pine
PB2 Industrial
Press Size: 5' x 18'
Panel Sizes: 5' x 6' to 5' x 18'
Thicknesses ranging from 7/16" - 1 1/2"
ECC Certificate | Spec Sheet

 

Martell, CA
Western Pine
PB2 Industrial
Cut-to-size Capabilities
Press size: 5' x 24'
Panel Sizes: 4'x 6' to 5' x 16'
Thicknesses ranging from 3/8" – 1 1/4"
ECC Certificate | Spec Sheet

 

Springfield, OR
Douglas Fir
PB2, PB3 Industrial
Cut-to-Size Capabilities
Press size: 4' x 16 ‘ & 5' x 24'
Panel sizes: 4' x 6' to 5' x 14'
Thicknesses ranging from 3/8" – 1 3/4"
ECC Certificate | Spec Sheet

 

Files

Current SCS Certificates can be requested by contacting SierraPine.

Encore FR
 


SierraPine flame retardant Encore™ FR is made with no added urea formaldehyde and is designed for critical applications where Class 1 flame retardant material is required. Encore FR has a low flame spread and smoke development as well as extremely low VOC emissions. During the manufacturing process, the flame retardant additive is blended with the fiber throughout the panel. This process delivers superior performance versus topical flame retardant applications. In addition, Encore FR can be machined, cut, sanded, and grooved without compromising the flame retardance.

  • Guardian Certified to U.S. & Canadian Class 1 standards:
    • Flame Spread rating - 25
    • Smoke Development rating - 70
  • No added urea formaldehyde
  • Pre-consumer recycled wood content
  • FSC® Mix Credit Certified - available option
  • LEED® credit support: MRc 4, 5, 7 and IEQc4.4
  • CARB ATCM 93120 Phase 2 Certified
  • Third party certification - SCS, ECC, Guardian
  • CHPS compliant - California section 01350 approved
  • Manufactured with pride in Springfield, OR

Encore™ FR, class 1 (A) certified flame retardant sustainable design particleboard panels that utilize an adhesive system containing no urea formaldehyde. This product is Guardian, ECC & SCS Certified and CHPS Compliant.

Manufacturer Locations

Springfield, OR
Douglas Fir
PB2
Cut-to-Size Capabilities
Press size: 4' x 16 ‘ & 5' x 24'
Panel sizes: 4' x 6' to 5' x 14'
Thicknesses ranging from 1/2" - 1 1/8"
ECC Certificate | Spec Sheet

 

Files

Current SCS Certificates can be requested by contacting SierraPine.

Countertop

Countertop Grade particleboard is slightly higher in density to ensure good bending strength and  tight core consolidation for edge machining.

Manufacturer Locations

Adel, GA
Thicknesses: 3/4 & 1 1/8"
Widths: 25" to 30 1/4"
Lengths: 8' & 10'
ECC Certificate | Spec Sheet

Springfield, OR
Thicknesses: 5/8 – 1 3/16"
Widths: 24" to 61" wide
Lengths: 6' to 12'
ECC Certificate | Spec Sheet

Stair Tread

Stair Tread grade is used for interior treads that are subsequently covered with carpeting or resilient flooring. SierraPine Stair Tread conforms to HUD/FHA UM70B.

Manufacturer Locations

Springfield, OR
M3 Industrial Grade
Thickness: 1 1/8
Widths: 10 1/4" – 11 1/2"
Length: 12'
ECC Certificate | Spec Sheet

Shelving

SierraPine particleboard (PB) is widely used in many shelving applications. PB shelves are uniform and economical, can be painted, laminated or veneered and have good dimensional stability and load bearing capacity when properly designed.

Manufacturer Locations

Adel, GA
Straight Edge
Thicknesses: 5/8” & 3/4"
Widths: 11 1/4” to 24”
Lengths: 97” to 145”
ECC Certificate | Spec Sheet

Martell, CA
Straight Edge, Bullnose and Edge-filled capabilities
Thicknesses: 5/8” & 3/4”
Widths: 11 1/4” to 24”
Lengths: 73” to 193”
ECC Certificate | Spec Sheet

Springfield, OR
Straight Edge, Bullnose and Edge-filled capabilities
Thicknesses: 5/8” & 3/4”
Widths: 11 1/4” to 24”
Lengths: 97” to 145”
ECC Certificate | Spec Sheet

Underlayment

Particleboard underlayment is used under carpeting or other floor covering material in residential or commercial construction. SierraPine underlayment conforms to HUD/FHA UM70B.

Manufacturer Locations

Martell, CA
Thicknesses: 3/8" - 3/4"
Panel Size: 48" x 96"
ECC Certificate | Spec Sheet

Springfield, OR
Thicknesses: 3/8” – 3/4”
Panel Size: 4’ x 8’
ECC Certificate | Spec Sheet